$ 799.99 $ 5,999.99
is back-ordered. We will ship it separately in 10 to 15 days.
Used in good condition
Ships within 24 hours from Washington State via UPS.
All units will have security seals with serial numbers inside and outside. Warranties will be void if removed or tempered with. We will and have prosecuted those that committed fraud.
Colors will vary from grey to black. All will be used in good condition.
These units will be shipped from Washington State Should be delivered within 3-5 business days to anywhere in USA.
You will need to flash your SD card with our firmware here:
The devices will range in hash rates of 80MHS to 110MHS depending on pool, coin, frequency settings, hardware variance, and other random factors.
1100w GOLD power supply will be included. Control board will also be included so it will be a plug and play machine. No assembly required
30 Days Factory Warranty. No Refunds or Exchanges.
• Developed on 28nm using very low power design techniques and best efficiency.
• Custom IC package with power bars for low voltage, high current feeding.
• Configurable in daisy chain mode for distributed work with up to 253 ASICs.
• Standard SPI interface with CS pin needed to enclose all useful SDI and SDO data.
• 27 highly optimized hashing engines based on custom ASIC cells up to 1.6M.
• Built-in redundancy architecture to allow for bad engines to be bypassed without affecting mining operation.
• Flexibility to configure the PLL clock and computation performance.
• Hashing power of 1.6M in nominal and 1.8M in Turbo mode.
• Power usage of 10W in typical nominal and 12W in typical Turbo mode.
• Supply voltage of 0.78V in low power, 0.84 V in Turbo mode for ICs.
• No need for special cooling, just regular top and bottom heat sinks plus fan cooling.
The Device Specs
• A Total of 6 boards with 10 chips on each board, Total 60 Chips in a miner
• Size = 51cm—42cm—16cm
• Temperature = Runs cooler than the A1 miners